40" Blade Span with 20 degree Blade Pitch. System rotates simultaneously along with spinning of each individual fan. Rosewood plywood blade set included. Oil Burnished Bronze Finish. 2 - 82 x 20 mm Motors. 0, 45, and 90 degree motor angles. 6" and 18" downrods included. Integrated light included with Frosted Opal glass. Uses max watt: 2-60 (C) - bulbs NOT included. Fan speed, reverse & light dimmer remote control included.

40" Blade Span with 20 degree Blade Pitch. System rotates simultaneously along with spinning of each individual fan. Rosewood plywood blade set included. Satin Nickel Finish. 82 x 20 mm Motors. 0, 45, and 90 degree motor angles. 6" and 18" downrods included. Integrated light included with Frosted Opal glass. Uses max watt: 2-60 (C) - bulbs NOT included. Fan speed, reverse & light dimmer remote control included.

40" Blade Span with 20 degree Blade Pitch. System rotates simultaneously along with spinning of each individual fan. Gray translucent Polymeric blade set included. Satin Nickel Finish. 82 x 20 mm Motors. 0, 45, and 90 degree motor angles. 6" and 18" downrods included. Integrated light included with Frosted Opal glass. Uses max watt: 3-15 (C) - bulbs NOT included. Fan speed, reverse & light dimmer remote control included.

42" Blade Span. Dark Bronze body finish with three Mahogany blades. Includes ceiling canopy suitable for installation on flat ceilings and sloped ceilings up to 33 degrees. Includes 5 in. and 17 in. downrods (longer downrods available, call to order). Hand held remote control included. Reversible. UL Listed. Limited Lifetime Motor Warranty.

Four Blades. 42" Blade Sweep. 100" of Lead Wire. 8 Optional Length Cables Included (6", 12", 18", 24", 36", 48", 60", & 72"). 188 x 20 Motor Size. 3 Speeds-Reversible w/Wall Control. 16 Poles .53/.48/.34 AMPS on H/M/L 63/38/17 WATTS on H/M/L 70/52/31 RPMS on H/M/L. Remote Control Adaptable. Not Light Kit Adaptable. Lifetime Motor Warranty.

Four Blades. 42" Blade Sweep. 100" of Lead Wire. 8 Optional Length Cables Included (6", 12", 18", 24", 36", 48", 60", & 72"). 188 x 20 Motor Size. 3 Speeds-Reversible w/Wall Control. 16 Poles .53/.48/.34 AMPS on H/M/L 63/38/17 WATTS on H/M/L 70/52/31 RPMS on H/M/L. Remote Control Adaptable. Not Light Kit Adaptable. Lifetime Motor Warranty.

42" Blade Span with 20 degree Blade Pitch. System rotates simultaneously along with spinning of each individual fan. Rosewood plywood blade set included. Royal Bronze Finish. 82 x 20 mm Motors. 0, 45, and 90 degree motor angles. 6" and 18" downrods included. Integrated light included with Frosted Opal glass. Uses max watt: 2-60 (C) - bulbs NOT included. Fan speed, reverse & light dimmer remote control included.

42" Blade Span with 20 degree Blade Pitch. System rotates simultaneously along with spinning of each individual fan. Rosewood plywood blade set included. Satin Nickel Finish. 82 x 20 mm Motors. 0, 45, and 90 degree motor angles. 6" and 18" downrods included. Integrated light included with Frosted Opal glass. Uses max watt: 2-60 (C) - bulbs NOT included. Fan speed, reverse & light dimmer remote control included.

42" Blade Span with 20 degree Blade Pitch. System rotates simultaneously along with spinning of each individual fan. Rosewood plywood blade set included. Royal Bronze Finish. 82 x 20 mm Motors. 0, 45, and 90 degree motor angles. 6" and 18" downrods included. Integrated light included with Frosted Opal glass. Uses max watt: 2-60 (C) - bulbs NOT included. Fan speed, reverse & light dimmer remote control included.

42" Blade Span with 20 degree Blade Pitch. System rotates simultaneously along with spinning of each individual fan. Rosewood plywood blade set included. Satin Nickel Finish. 82 x 20 mm Motors. 0, 45, and 90 degree motor angles. 6" and 18" downrods included. Integrated light included with Frosted Opal glass. Uses max watt: 2-60 (C) - bulbs NOT included. Fan speed, reverse & light dimmer remote control included.

High performance twin turbofans. Total sweep 42". 1,000-1,500 R.P.M. Fan Speeds. Complete Assembly Rotates 360 degrees at 3.0 R.P.M. Turbofan heads adjustable up and down. 3 1/2 and 6" Length 3/4" I.D. Downrods (Uses 3/4" I.D. DR5 Series Downrod). Integrated Halogen Light uses 1-100W Halogen Bulb (bulb included). Cap for no light use included. Wall Mount Touch Control System Incorporating Fully Independent Fan Head and Axis Rotation Speeds.

High performance twin turbofans. Total sweep 42". 1,000-1,500 R.P.M. Fan Speeds. Complete Assembly Rotates 360 degrees at 3.0 R.P.M. Turbofan heads adjustable up and down. 3 1/2 and 6" Length 3/4" I.D. Downrods (Uses 3/4" I.D. DR5 Series Downrod). Integrated Halogen Light uses 1-100W Halogen Bulb (bulb included). Cap for no light use included. Wall Mount Touch Control System Incorporating Fully Independent Fan Head and Axis Rotation Speeds.

Traditional Gyro Fan in Brushed Nickel finish. High Performance Twin Turbofans. 42" total sweep. Complete assembly rotates 360 degrees at 3 R.P.M. Turbofan Heads adjustable up & down. Integrated Halogen Light uses 1-100W halogen bulb (bulbs included). Includes cap for no light use. Includes 3 1/2" x 3/4" and 12" x 3/4" downrods. Includes Wall Mount Touch Control System incorporating fully independent fan head and axis rotation speeds. Indoor/Outdoor UL Listed for Wet Locations. Lifetime Warranty.

Traditional Gyro Fan in Oil-Rubbed Bronze finish. High Performance Twin Turbofans. 42" total sweep. Complete assembly rotates 360 degrees at 3 R.P.M. Turbofan Heads adjustable up & down. Integrated Halogen Light uses 1-100W halogen bulb (bulbs included). Includes cap for no light use. Includes 3 1/2" x 3/4" and 12" x 3/4" downrods. Includes Wall Mount Touch Control System incorporating fully independent fan head and axis rotation speeds. Indoor/Outdoor UL Listed for Wet Locations. Lifetime Warranty.

Traditional Gyro Fan in White finish. High Performance Twin Turbofans. 42" total sweep. Complete assembly rotates 360 degrees at 3 R.P.M. Turbofan Heads adjustable up & down. Integrated Halogen Light uses 1-100W halogen bulb (bulbs included). Includes cap for no light use. Includes 3 1/2" x 3/4" and 12" x 3/4" downrods. Includes Wall Mount Touch Control System incorporating fully independent fan head and axis rotation speeds. Indoor/Outdoor UL Listed for Wet Locations. Lifetime Warranty.

42" Blade Span. White finish with White Blades and Amber Glass. Includes Hand Held Remote Control. Includes 3" & 9" (1/2" Interior Diameter) Pole. Total height is either 18 inches or 14" (depending on downrod used). Limited Lifetime Motor Warranty.

This fan uses hand-assembled stained glass panels in a historic frame. It comes with die-cast construction and a lifetime motor. Includes 4 Maple blades (additional finishes available upon request). 42 inch blade span. 18 inches tall. 12 degree blade pitch. Includes 3" & 9" (1/2" Interior Diameter) Pole (longer downrods available - sold separately). Includes Hand Held Remote Control. Uses 75 watt Incandescent bulb.

42" Blade Span with 20 degree Blade Pitch. System rotates simultaneously along with spinning of each individual fan. Rosewood plywood blade set included. Satin Nickel Finish. 82 x 20 mm Motors. 0, 45, and 90 degree motor angles. 6" and 18" downrods included. Integrated light included with Frosted Opal glass. Uses max watt: 2-60 (C) - bulbs NOT included. Fan speed, reverse & light dimmer remote control included.

42" Blade Span with 20 degree Blade Pitch. System rotates simultaneously along with spinning of each individual fan. Gray Translucent Polymeric blade set included. Satin Nickel Finish. 82 x 20 mm Motors. 0, 45, and 90 degree motor angles. 6" and 18" downrods included. Integrated light included with Frosted Opal glass. Uses max watt: 2-60 (C) - bulbs NOT included. Fan speed, reverse & light dimmer remote control included.

42 Inch - Race car ceiling fan. White background with model race cars on each blade. Features dome light kit; use one 60 watt standard base bulb. 3-Speed Fan. Includes 4" x 3/4" downrod. Extension downrods available. Limited Lifetime Motor Warranty.

Traditional Gyro Fan in Belcaro Walnut finish. High Performance Twin Turbofans. 42" total sweep. Complete assembly rotates 360 degrees at 3 R.P.M. Turbofan Heads adjustable up & down. Integrated Halogen Light uses 1-100W halogen bulb (bulbs included). Includes cap for no light use. Includes 3 1/2" x 3/4" and 12" x 3/4" downrods. Includes Wall Mount Touch Control System incorporating fully independent fan head and axis rotation speeds. Lifetime Warranty.

Traditional Gyro Fan in Sterling Walnut finish. High Performance Twin Turbofans. 42" total sweep. Complete assembly rotates 360 degrees at 3 R.P.M. Turbofan Heads adjustable up & down. Integrated Halogen Light uses 1-100W halogen bulb (bulbs included). Includes cap for no light use. Includes 3 1/2" x 3/4" and 12" x 3/4" downrods. Includes Wall Mount Touch Control System incorporating fully independent fan head and axis rotation speeds. Lifetime Warranty.

The Vent-Bettina rotational ceiling fan is thoughtfully designed with its arms gently curving upwards. The fan offers fluid lines and quiet axial rotation. The motor heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angle of the motor to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotational is achieved by both motor head position and fan blade speed. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy gauge spun and stamped steel, the Bettina is UL listed and carries a limited lifetime warranty. The Bettina is equipped with metal blades and decorative metal blade guards or solid, ecologically harvested mahogany blades without blade guards. All metal bladed fans are damp location rated (if ordered with protective powder or clear coatings - please specify this in the comments section of your shopping cart while checking out). Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. This model is not light adaptable - see other option that includes light. May be mounted with 10, 20, 30, 48 or 72" downrods. Specify which size downrod when ordering fan (there is an additional charge for 48 and 72" downrods) in the comments section of shopping cart as well. Technical Information: Weight 19 lbs; Width 42 inches; Voltage 110/220v.

The Vent-Bettina rotational ceiling fan is thoughtfully designed with its arms gently curving upwards. The fan offers fluid lines and quiet axial rotation. The motor heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angle of the motor to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotational is achieved by both motor head position and fan blade speed. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy gauge spun and stamped steel, the Bettina is UL listed and carries a limited lifetime warranty. The Bettina is equipped with metal blades and decorative metal blade guards. All metal bladed fans are damp location rated (if ordered with protective powder or clear coatings - please specify this in the comments section of your shopping cart while checking out). Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. Lighting Accessories: The Vent-Bettina is compatible with the Tech Lighting Free Jack Venus low voltage lighting systems. The Venus canopy attaches to the bottom of the center gearbox and from which, you may hang any of Tech's Free Jack elements - this model is wired for light, but the light is sold separately. For more information, call us toll free 1-800-400-3026. May be mounted with 10, 20, 30, 48 or 72" downrods. Specify which size downrod when ordering fan in the comments section of your shopping cart (there is an additional charge for 48 and 72" downrods). Technical Information: Weight 19 lbs; Width 42 inches; Voltage 110/220v.

The Vent-Bettina rotational ceiling fan is thoughtfully designed with its arms gently curving upwards. The fan offers fluid lines and quiet axial rotation. The motor heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angle of the motor to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotational is achieved by both motor head position and fan blade speed. The Bettina is available in Polished Chrome, Brushed Nickel, Polished Copper and Bronze. Black, White Brushed Copper and Brushed Brass are available as special orders (please call us to order by phone). Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy gauge spun and stamped steel, the Bettina is UL listed and carries a limited lifetime warranty. The Bettina is equipped with metal blades and decorative metal blade guards or solid, ecologically harvested mahogany blades without blade guards. All metal bladed fans are damp location rated if ordered with protective powder or clear coatings. Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. Lighting Accessories: The Vent-Bettina is compatible with the Tech Lighting Free Jack Venus low voltage lighting systems. The Venus canopy attaches to the bottom of the center gearbox and from which, you may hang any of Tech's Free Jack elements. For more information, call us toll free 1-800-400-3026. May be mounted with 10, 20, 30, 48 or 72" downrods. Specify which size downrod when ordering fan (there is an additional charge for 48 and 72" downrods). Technical Information: Weight 19 lbs; Width 42 inches; Voltage 110/220v. Please Note: The Vent Bettina is either equipped with metal blades and decorative metal blade guards (cages) or wood blades and NO blade guards (cages).

The Vent-Bettina rotational ceiling fan is thoughtfully designed with its arms gently curving upwards. The fan offers fluid lines and quiet axial rotation. The motor heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angle of the motor to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotational is achieved by both motor head position and fan blade speed. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy gauge spun and stamped steel, the Bettina is UL listed and carries a limited lifetime warranty. This model is equipped with ecologically harvested mahogany blades without blade guards. Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. Lighting Accessories: The Vent-Bettina is compatible with the Tech Lighting Free Jack Venus low voltage lighting systems - light sold separately. The Venus canopy attaches to the bottom of the center gearbox and from which, you may hang any of Tech's Free Jack elements. For more information, call us toll free 1-800-400-3026. May be mounted with 10, 20, 30, 48 or 72" downrods. Please specify which size downrod when ordering fan in the comments section of your shopping cart (there is an additional charge for 48 and 72" downrods). Technical Information: Weight 19 lbs; Width 42 inches; Voltage 110/220v.

The Vent-Bettina rotational ceiling fan is thoughtfully designed with its arms gently curving upwards. The fan offers fluid lines and quiet axial rotation. The motor heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angle of the motor to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotational is achieved by both motor head position and fan blade speed. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy gauge spun and stamped steel, the Bettina is UL listed and carries a limited lifetime warranty. The Bettina is equipped with metal blades and decorative metal blade guards or solid, ecologically harvested mahogany blades without blade guards. All metal bladed fans are damp location rated (if ordered with protective powder or clear coatings - please specify this in the comments section of your shopping cart while checking out). Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. This model is not light adaptable - see other option that includes light. May be mounted with 10, 20, 30, 48 or 72" downrods. Specify which size downrod when ordering fan (there is an additional charge for 48 and 72" downrods) in the comments section of shopping cart as well. Technical Information: Weight 19 lbs; Width 42 inches; Voltage 110/220v.

The Vent-Bettina rotational ceiling fan is thoughtfully designed with its arms gently curving upwards. The fan offers fluid lines and quiet axial rotation. The motor heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angle of the motor to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotational is achieved by both motor head position and fan blade speed. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy gauge spun and stamped steel, the Bettina is UL listed and carries a limited lifetime warranty. The Bettina is equipped with metal blades and decorative metal blade guards. All metal bladed fans are damp location rated (if ordered with protective powder or clear coatings - please specify this in the comments section of your shopping cart while checking out). Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. Lighting Accessories: The Vent-Bettina is compatible with the Tech Lighting Free Jack Venus low voltage lighting systems. The Venus canopy attaches to the bottom of the center gearbox and from which, you may hang any of Tech's Free Jack elements - this model is wired for light, but the light is sold separately. For more information, call us toll free 1-800-400-3026. May be mounted with 10, 20, 30, 48 or 72" downrods. Specify which size downrod when ordering fan in the comments section of your shopping cart (there is an additional charge for 48 and 72" downrods). Technical Information: Weight 19 lbs; Width 42 inches; Voltage 110/220v.

The Vent-Bettina rotational ceiling fan is thoughtfully designed with its arms gently curving upwards. The fan offers fluid lines and quiet axial rotation. The motor heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angle of the motor to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotational is achieved by both motor head position and fan blade speed. The Bettina is available in Polished Chrome, Brushed Nickel, Polished Copper and Bronze. Black, White Brushed Copper and Brushed Brass are available as special orders (please call us to order by phone). Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy gauge spun and stamped steel, the Bettina is UL listed and carries a limited lifetime warranty. The Bettina is equipped with metal blades and decorative metal blade guards or solid, ecologically harvested mahogany blades without blade guards. All metal bladed fans are damp location rated if ordered with protective powder or clear coatings. Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. Lighting Accessories: The Vent-Bettina is compatible with the Tech Lighting Free Jack Venus low voltage lighting systems. The Venus canopy attaches to the bottom of the center gearbox and from which, you may hang any of Tech's Free Jack elements. For more information, call us toll free 1-800-400-3026. May be mounted with 10, 20, 30, 48 or 72" downrods. Specify which size downrod when ordering fan (there is an additional charge for 48 and 72" downrods). Technical Information: Weight 19 lbs; Width 42 inches; Voltage 110/220v. Please Note: The Vent Bettina is either equipped with metal blades and decorative metal blade guards (cages) or wood blades and NO blade guards (cages).

The Vent-Bettina rotational ceiling fan is thoughtfully designed with its arms gently curving upwards. The fan offers fluid lines and quiet axial rotation. The motor heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angle of the motor to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotational is achieved by both motor head position and fan blade speed. The Bettina is available in Polished Chrome, Brushed Nickel, Polished Copper and Bronze. Black, White Brushed Copper and Brushed Brass are available as special orders (please call us to order by phone). Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy gauge spun and stamped steel, the Bettina is UL listed and carries a limited lifetime warranty. The Bettina is equipped with metal blades and decorative metal blade guards or solid, ecologically harvested mahogany blades without blade guards. All metal bladed fans are damp location rated if ordered with protective powder or clear coatings. Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. Lighting Accessories: The Vent-Bettina is compatible with the Tech Lighting Free Jack Venus low voltage lighting systems. The Venus canopy attaches to the bottom of the center gearbox and from which, you may hang any of Tech's Free Jack elements. For more information, call us toll free 1-800-400-3026. May be mounted with 10, 20, 30, 48 or 72" downrods. Specify which size downrod when ordering fan (there is an additional charge for 48 and 72" downrods). Technical Information: Weight 19 lbs; Width 42 inches; Voltage 110/220v. Please Note: The Vent Bettina is either equipped with metal blades and decorative metal blade guards (cages) or wood blades and NO blade guards (cages).

The Vent-Bettina rotational ceiling fan is thoughtfully designed with its arms gently curving upwards. The fan offers fluid lines and quiet axial rotation. The motor heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angle of the motor to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotational is achieved by both motor head position and fan blade speed. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy gauge spun and stamped steel, the Bettina is UL listed and carries a limited lifetime warranty. The Bettina is equipped with metal blades and decorative metal blade guards or solid, ecologically harvested mahogany blades without blade guards. All metal bladed fans are damp location rated (if ordered with protective powder or clear coatings - please specify this in the comments section of your shopping cart while checking out). Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. This model is not light adaptable - see other option that includes light. May be mounted with 10, 20, 30, 48 or 72" downrods. Specify which size downrod when ordering fan (there is an additional charge for 48 and 72" downrods) in the comments section of shopping cart as well. Technical Information: Weight 19 lbs; Width 42 inches; Voltage 110/220v.

The Vent-Bettina rotational ceiling fan is thoughtfull